Trailrider 2.0

Ride the Trails!

29 Zoll: 1.739 gramm 650B: 1661 gramm

Trailrider 2.0 Wheels

The name says it all!

Trailrider Tune MTB wheelset is tubeless-ready with our own rim!


We use standard bearings. This means you can also buy bearings in Australia if you need to. Ours are just a little special, with two main differences:

  • Our bearings have a higher fat filling grade. 30% is standard, whilst ours are filled to 50%. This not only prolongs their life, but also provides a better seal.
  • Standard bearings have variations in play from their production.
Tune bearings have the play specially determined dependent on their use. One single Tune bearing is not standard – the bearing in the free-wheel body on the left. It is constructed specifically to withstand high forces and last extra long.

Sapim D-Light

The SAPIM CX-Super Spoke are lightest steel spoke ever made. The SAPIM CX-Super Spoke has been developed for extra light wheels. A new grade of stainless steel enables SAPIM to reduce the diameter of the spoke, whilst increasing its strength and fatigue resistance. Effectively, the SAPIM CX-Super is 17% lighter than the SAPIM CX-Ray and its strength is increased by 120N in the middle section versus that of the SAPIM CX-Ray.


Specs Trailrider 2.0

Hubs King / Kong
Rim Tune Trailrider
Hole 32
Nipple Sapim, Alu, anodised
Spokers SAPIM D-Light
max. rider weight 120 kg
Marathon 32
AllMountain 80
Enduro 64
Downhill 16
Freeride 16
Trailrider 2.0

Trailrider Tune MTB wheelset is tubeless-ready with our own rim!

Rims Trailrider 2.0

Inner width 25.8 mm
Outer width 30.0 mm
Hight 19.5 mm
ERD 555 mm (650B), 593 mm (29")
Max. tire pressure 45 psi / 3.0 bar
Tire width 2.1" - 2.4"
Weight (±5%) 480 g (650B), 515 g (29")
tune Wheels

The tuning of running wheels has the most noticeable effect when it comes to weight savings. All the wheels are hand-fed, pressed and perfectly centered. Our bikes stand for the highest quality and have proven themselves over millions of kilometers.