MAG150

Unlimited use with minimum weight

164 gramm



MAG150 Hubs

German engineering and craftsmanship!

How do you make light stuff become even lighter? We drilled our free-wheeling mechanism at unloaded points and reduced and wrapped the left flange of the Mag 150 with carbon. Hand made in the Black Forest. The result: We saved 14g compared to the Mag 170. You can strain the straight spokes especially tight. The wheel is therefore more stiff and stronger as with a normal flange. This is the reason why we release the Mag 150 for every biker weight.
The MAG 150 allows unrestricted application at lowest weight. A perfect symbiosis of aluminium and carbon. The complex manual lamination of the carbon flange does not economise only the weight but also does increase the tenacity of the flange. The 2011 version convinces with stability. Its new 17mm axle and the closer flanges do increase again the stiffness!
Unique construction: through adjustable play no bearing deadlock even at hardest lacing. The bigger flange (high/low flange) on the freewheel side allows sloped spokes and therefore a symmetric wheel.
Free choice of freewheel profile for Campagnolo, SRAM or Shimano!
ee.
Available in all Tune anodized colours!
Due to local production spare part service guaranteed up to the smallest spring.

 

Bearings#

For our hubs we only use standard bearings adjusted for our necessities. This means our bearings have the same width and diameter measurements as standard high precision deep groove ball bearings. Whereas the insides are especially tuned for us. For example, we use a special bearing grease whereby the friction can be reduced, and the lifespan extended. The inside bearing of the freewheel body creates a specialty. The characteristics were individually adapted for the high load experienced by the bearing. To ensure best performance we also adjusted the bearing play exactly for our hubs. Advantage: Standard bearings can be used temporarily, if tune TUNE bearings are not available.

Tune Nabe Querschnitt Lager

1/2

Specs MAG150

Weight 164g
Material carbon, titan, aluminium
Width of axis 130mm (RB), 135mm (MTB)
Diameter of axis 17mm
Number of holes 20, 24, 28, 32
Bearing 4 groove-ball bearing
Colours all Tune anodically oxidized shades
Freewheel Bodys Shimano/SRAM (8-, 9-, 10-, 11-speed), Campagnolo, SRAM XD
Terrain
Road 100
Climbing 100
Race 100
Weight 100
MAG150

The MAG 150 from Tune allows you unlimited possibilities of use, with the least weight. It is stored 4 times, 8 times sealed.