Prince Boost

A very light hub with BOOST standard.

192 gramm



Prince Boost Hubs


The recent Prince BOOST not only pleases cyclists but also brings a smile to the face of each wheel builder. Enjoy all the advantages of the BOOST standard and remain in a good mood while viewieng on the scales.

 

 

Bearings

For our hubs we only use standard bearings adjusted for our necessities. This means our bearings have the same width and diameter measurements as standard high precision deep groove ball bearings. Whereas the insides are especially tuned for us. For example, we use a special bearing grease whereby the friction can be reduced, and the lifespan extended. The inside bearing of the freewheel body creates a specialty. The characteristics were individually adapted for the high load experienced by the bearing. To ensure best performance we also adjusted the bearing play exactly for our hubs. Advantage: Standard bearings can be used temporarily, if tune TUNE bearings are not available.

Tune Nabe Querschnitt Lager

1/2

Specs Prince Boost

Material aluminium
Available hole drilling 28, 32
Flange distance from rim center (left / right) 35,5 mm / 21,9 mm
Hub spacing 148 mm
Terrain
Marathon 100
XC 100
AllMountain 100
Enduro 100
Downhill 100
Prince Boost

The new hub from tune: Prince BOOST – A very light hub with BOOST standard.