!!New!! Schwarzbrenner 45 Clincher

the highest lateral rigidity and stability

1320 gramm



!!New!! Schwarzbrenner 45 Clincher Wheels


Schnapsbrenner + Schwarzfahrer = Schwarzbrenner 45C

You can’t argue with over two decades of experience in wheels. We know what we’re talking about. We are progressive when possible, and traditional when necessary.

Like a good meal, anyone can throw some food together, but true artisan perfection takes experience and time.

Schwarzbrenner 45 C “From 25 to 1320”

Some numbers for you:

25: mm tires. For full speed on the road, the rim is aero-optimized for 25mm tires.

33: Maximum permitted tire width. (in mm)

45: rim height (in mm)

100: 100% produced in Germany. The rim is produced in a fully-automated process especially for us according to our stringent specifications. So we know that the carbon is laid where it’s needed.

100% control of each rim. Permanent control of material fatigue, impact and lateral stiffness, in the in-house test centre. The highest quality is therefore guaranteed.

100% hand built. In production, we rely on a fully-automated processes, but in the build-up, we use our decades of experience and build all carbon wheels by hand.

100kg maximum rider weight.

250: TG 250 °. The TG is one of the most important parameters for the selection of the braking area. It means the brake sidewall can withstand temperatures up to 250 ° C before any material damage.

1450: grams. As a disc variant.

1320: grams. As a rim brake variant.

Despite all the numbers, the Schwarzbrenner 45C has the highest lateral rigidity and stability. Built with super-stylish aerodynamic CX-Ray spokes from Sapim, the Schwarzbrenner becomes a must-have.

Conclusion:

The Schwarzbrenner 45C is the legitimate successor to our Schwarzbrenner 38 and

offers the best value for money for carbon wheels on the market

Approved for RR and Gravel

Bearings

We use standard bearings. This means you can also buy bearings in Australia if you need to. Ours are just a little special, with two main differences:

  • Our bearings have a higher fat filling grade. 30% is standard, whilst ours are filled to 50%. This not only prolongs their life, but also provides a better
  • Standard bearings have variations in play from their production.
Tune bearings have the play specially determined dependent on their use. One single Tune bearing is not standard – the bearing in the free-wheel body on the left. It is constructed specifically to withstand high forces and last extra long.

Carbon Wrapping

The spoke crossings are wrapped with Carbon fibre, which gets strengthened with resin. This increases the wheel quality. The result is that the spoke construction becomes more stable, several components are connected to one stiff, long lasting unit. The increased stiffness leads to a more direct reaction when riding out of the saddle and enables precise steering. In the case of an overload, e.g. by a shock, the most stressed spoke gets released by the spoke it is wrapped with.

Sapim CX-Ray

The CX-Ray still receives the best results in fatigue testing of any spoke. Its unique strength and flexibility make the CX-Ray suitable for most bicycle disciplines. The middle section of the spoke is drawn then pressed in a special mold to form its specific profile. CX-Ray spokes are used by top bike racers and triathletes around the world. Even downhillers use them, recognizing their strength and flexibility. Special alloy treatment and sophisticated production make this all possible. The CX-Ray fits is all standard hub holes.

1/4

Specs !!New!! Schwarzbrenner 45 Clincher

Hubs Mag 170 / Mig 70
Rims Schwarzbrenner 45C (Clincher)
Spokes SAPIM CX-RAY, black-chrom
Holes count 20 / 24
Nipple Sapim, Aluminium, all Tune anodized colour
Lacing front radial, rear 2-Timescrossed
Max. Rider weight 100 Kg
Wheelset 45 mm 1320 g
Terrain
Road 100
Cyclocross/Gravel 100
!!New!! Schwarzbrenner 45 Clincher

the best value for money for carbon wheels on the market

Rims !!New!! Schwarzbrenner 45 Clincher

Inner width 18 mm
Outer width 26,60 mm
Rim height 45 mm
Rim tape width 20 mm
Tire pressure 23 mm 8,5 bar
25 mm 8,0 bar
28 mm 7,5 bar
33 mm 5 bar
Tire width min. 23 mm / max. 33 mm
ERD 553mm
Rim weight (±5%) 430 g
tune Wheels

The tuning of running wheels has the most noticeable effect when it comes to weight savings. All the wheels are hand-fed, pressed and perfectly centered. Our bikes stand for the highest quality and have proven themselves over millions of kilometers.