Black Burner Plus

finest carbon

650B: 1.620 gramm



Black Burner Plus Wheels

hotter... hotter... Black Burner

Ultra stiff carbon rims, your choice of hub colour and nipples allow you to personalise this piece of jewellery.

For this combination we’ve drawn deep from the range. We use the classics, the KING and KONG together, laced with the ever-stylish Sapim D-Light spokes to gorgeous carbon rims. Tune good looks meets featherweight and stiff.

The Black Burners are laced and trued by hand. Even the rush of air won’t cool the hotness of our Carbon Fibre.

And naturally, they’re tubeless ready.

 

Sapim D-Light

A double butted spoke is drawn to its specific profile, which defines its high strength. The short 2 mm section of the D-Light reduces weight especially on the threaded side. The 2mm section starts just at the beginning of the thread. Therefore, the rotating masses at the end of the spoke are especially reduced. This brings benefits to both the acceleration and braking qualities of the wheel. The use of 14G nipples offers a wide variety of combinations. The middle section is increased to 1,65 mm, which makes the spoke much stiffer and brings less torsion during truing than a 1,5 mm middle section. This results in an easier building process of the wheels.

Bearings

We use standard bearings. This means you can also buy bearings in Australia if you need to. Ours are just a little special, with two main differences: Our bearings have a higher fat filling grade. 30% is standard, whilst ours are filled to 50%. This not only prolongs their life, but also provides a better seal. Standard bearings have variations in play from their production. Tune bearings have the play specially determined dependent on their use. One single Tune bearing is not standard – the bearing in the free-wheel body on the left. It is constructed specifically to withstand high forces and last extra long.

1/3

Specs Black Burner Plus

Hubs King Boost & Kong Boost
Rims Black Burner Plus
Hole count 32
Spokes SAPIM D-Light, black-oxidized
Nipple SAPIM aluminium, anodized
Lacing 3-cross
Max. rider Weight 100kg
Terrain
Marathon 80
XC 80
AllMountain 100
Enduro 100
Downhill 80
Freeride 80
Black Burner Plus

Black Burner Plus. Supersteife carbon rims, free choice of color for hubs and nipples are the distinguishing features of these jewelery pieces.

Rims Black Burner Plus

Inner width 43 mm
Outer width 50 mm
Hight 25 mm
ERD 556
Max. tire pressure min 1,75 bar/ 25 psi, max. 4,1 bar/ 60 psi
Tire width min. 2,8“, max. 3,25“
Weight (±5%) 490 g