TSR 27

The entry into the fantastic, colorful world of TUNE wheelsets!

1440 gramm



TSR 27 Wheels

TSR 27 weighs only 1440 grams on the scales!

Welcome! Our popular “ MIG 70 “ and “ 170 MAG “ hubs, reliable Sapim „D-Light“ spokes and lightweight, strong and aerodynamic TUNE TSR rims with 27mm height all noteworthy features.
Colors , colors , colors … not only in the hub and nipples you have a free choice – even the rim decals are available in all Tune- colors (not in silver)! It simply does not get any more individual …
Where TUNE makes an entry into the wheel business is already the end of story for many others: TSR 27 brings only around 1,440 grams on the scales!
Our TSR wheelsets, like all Tune wheelsets, are built and trued by hand!

 

Tune TSR 27

Bearings

We use standard bearings. This means you can also buy bearings in Australia if you need to. Ours are just a little special, with two main differences:

  • Our bearings have a higher fat filling grade. 30% is standard, whilst ours are filled to 50%. This not only prolongs their life, but also provides a better seal.
  • Standard bearings have variations in play from their production.
Tune bearings have the play specially determined dependent on their use. One single Tune bearing is not standard – the bearing in the free-wheel body on the left. It is constructed specifically to withstand high forces and last extra long.

Sapim CX-Ray

A double butted spoke is drawn to its specific profile, which defines its high strength. The short 2 mm section of the D-Light reduces weight especially on the threaded side. The 2mm section starts just at the beginning of the thread. Therefore, the rotating masses at the end of the spoke are especially reduced. This brings benefits to both the acceleration and braking qualities of the wheel. The use of 14G nipples offers a wide variety of combinations. The middle section is increased to 1,65 mm, which makes the spoke much stiffer and brings less torsion during truing than a 1,5 mm middle section. This results in an easier building process of the wheels.

1/3

Specs TSR 27

Hubs MIG 70 and MIG 170
Rim Tune TSR27 (clincher), black or withe
Hole Count 24/28
Spokes SAPIM D-Light ( 2.0/1.65 ), black - oxidized, stainless steel
Nipple Sapim anodized aluminum
Lacing front radial, rear 3-cross
max. Rider weight 110kg
Terrain
Allround 100
Climbing 50
Race 50
Stiff 58
Weight 50
TSR 27

The Tune TSR 27 wheel set, as all TUNE wheels are, of course, built up and centered by hand.

Rims TSR 27

Inner width 13.9 mm
Outer width 19.4 mm
Hight 27 mm
ERD 587
Weight 451 g
Tire width 18-25 mm
Max. tire pressure 10 bar / 145 psi
Brake pads SwissStop FLASH PRO BXP
tune Wheels

The tuning of running wheels has the most noticeable effect when it comes to weight savings. All the wheels are hand-fed, pressed and perfectly centered. Our bikes stand for the highest quality and have proven themselves over millions of kilometers.