TSR 30

TSR 30 weighs only about 1,421 grams on the scales!

1421 gramm



TSR 30 Wheels


Welcome! Our popular “ MIG 70 “ and “ 170 MAG “ hubs, reliable Sapim „D-Light“ spokes and lightweight, strong and aerodynamic TUNE TSR rims with 30mm height all noteworthy features of the big brother of the TSR27.
Colours , colours , colours … not only in the hub and nipples you have a free choice – even the rim decals are available in all Tune-colours (except silver)! It simply does not get any more individual …
Where TUNE makes an entry into the wheel business is already the end of story for many others: TSR 30 brings only around 1,421 grams on the scales!

Bearings

We use standard bearings. This means you can also buy bearings in Australia if you need to. Ours are just a little special, with two main differences:

  • Our bearings have a higher fat filling grade. 30% is standard, whilst ours are filled to 50%. This not only prolongs their life, but also provides a better seal.
  • Standard bearings have variations in play from their production.
Tune bearings have the play specially determined dependent on their use. One single Tune bearing is not standard – the bearing in the free-wheel body on the left. It is constructed specifically to withstand high forces and last extra long.

Sapim CX-Ray

A double butted spoke is drawn to its specific profile, which defines its high strength. The short 2 mm section of the D-Light reduces weight especially on the threaded side. The 2mm section starts just at the beginning of the thread. Therefore, the rotating masses at the end of the spoke are especially reduced. This brings benefits to both the acceleration and braking qualities of the wheel. The use of 14G nipples offers a wide variety of combinations. The middle section is increased to 1,65 mm, which makes the spoke much stiffer and brings less torsion during truing than a 1,5 mm middle section. This results in an easier building process of the wheels.

1/3

Specs TSR 30

Hubs MIG 70 and MAG 170
Rim Tune TSR 30 (clincher), black or white
Hole Count 20/24
Spokes SAPIM D-Light ( 2.0/1.65 ), black - oxidized, stainless steel
Nipple Sapim anodized aluminum
Lacing front radial, rear 2-cross
max. Rider weight 110kg

Terrain
Allround 100
Climbing 50
Race 50
Stiff 60
Weight 50
TSR 30

The TSR 30 -wheel set, like all TUNE wheels, is hand-built and centered by hand.

Rims TSR 30

Inner width 13.89 mm
Outer width 18.3 mm
Hight 30 mm
ERD 577
Weight 460 g
Tire width 18-25 mm
Max. tire pressure 10 bar / 145 psi
Brake pads SwissStop FLASH PRO BXP
tune Wheels

The tuning of running wheels has the most noticeable effect when it comes to weight savings. All the wheels are hand-fed, pressed and perfectly centered. Our bikes stand for the highest quality and have proven themselves over millions of kilometers.